Leak Sealing for Cars 30ml (A/C)

Bewertung 

Perfect for the elimination of small leakage from vehicle air-conditioner.

The tube in the kit is compatible with cars with a cooling system filled with R134a refrigerant.

18,30 €
Bruttopreis
Menge

 

Varnostna politika (to uredite z modulom pomiritev stranke)

 

Politika dostave (to uredite z modulom pomiritev stranke)

 

Politika vračila (to uredite z modulom pomiritev stranke)

Beschreibung

Professional use only. Always use protective glasses and gloves.

PREVENTATIVE CHECK TEST:
1. Make the vacuum of the A/C system for 5 minutes.
2. Reach the value of „-1bar”. Keep this value for 4 minutes (nessessary condition). If you can’t keep this value, the leak is too big to be repaired.

INSTRUCTIONS:
1. Turn the air conditioning on.
2. Connect the hose to the syringe. Push the piston of the syringe, comletely filling the hose.
3. Connect the syringe to the low pressure port of the air conditioning system.
4. Push the piston of the syringe, introduce the product in the system, then disconnect.
5. Let the product takes effect with the air conditioning turned on for 20 minutes.

Artikeldetails
Bewertungen

Aktuell keine Kunden-Kommentare

Eigenen Kommentar verfassen

Leak Sealing for Cars 30ml (A/C)

Leak Sealing for Cars 30ml (A/C)

Perfect for the elimination of small leakage from vehicle air-conditioner.

The tube in the kit is compatible with cars with a cooling system filled with R134a refrigerant.

Eigenen Kommentar verfassen
16 andere Artikel in der gleichen Kategorie:
Vacuum Pump VRP-6DI Value Vorschau

Vacuum Pump VRP-6DI Value

Bewertungen: 0

Technical details: Voltage: 230V / 50-60Hz Flow rate: 6 cfm (170 l / min) End vacuum: 15 microns Engine power: 3/4 hp Thread connections: 1/4 "SAE and 3/8" SAE Oil filling: 600 ml Dimensions: 346X135X302mm Optional units for vacuum gauge: Pa, mBar, inHg, micron Weight: 11.5kg + oil + packaging

Preis 536,80 €
Mehr
Auf Lager
Manifold gauge VRM1-0101I Vorschau

Manifold gauge VRM1-0101I

Bewertungen: 0

Impact-resistant plastic case R22, R32, R290, R410A, 1234yf, R134a, R404A, R407C, R507 refrigerant packs. Pressure display: psi, bar, KPa, MPa, kg/cm Temperature display: °C, °F Works with standard 9V battery about 50 ours. 1 pin design. Battery status indicator.

Preis 140,30 €
Mehr
Auf Lager
Ultra Thin Fan Coil... Vorschau

Ultra Thin Fan Coil FCU-4000/6000

Bewertungen: 0

Model: FCU-4000/6000 Cooling capacity¹: 4000W (13700 BTU/h) Heating capacity²: 6000W (20500 BTU/h) Air flow max: 600 m3/h Air flow min: 260 m3/h Noise: 41 dB Power input: 15W Waterflow volume: 0,64 m3/h Pressure dropping: 24 kPa Water tube connection (inlet and outlet): R 1/2" Maximum working pressure: 16 bar Condensation pipe: ∅ 21mm Dimensions: 1500mm x...

Preis 890,60 €
Mehr
Auf Lager
Ultra Thin Fan Coil... Vorschau

Ultra Thin Fan Coil FCU-1000/1500

Bewertungen: 0

Model: FCU-1000/1500 Cooling capacity¹: 1000W (3400BTU/h) Heating capacity²: 1500W (5100BTU/h) Air flow max: 200 m3/h Air flow min: 80 m3/h Noise: 37 dB Power input: 10W Waterflow volume: 0,17 m3/h Pressure dropping: 12 kPa Water tube connection (inlet and outlet): R 1/2" Maximum working pressure: 16 bar Condensation pipe: ∅ 21mm Dimensions: 700mm x 130mm...

Preis 646,60 €
Mehr
Auf Lager
Nicht auf Lager PRESSURE-RELIEF FOR... Vorschau

PRESSURE-RELIEF FOR NITROGEN GAS 60BAR

Bewertungen: 0

For pressure reducing nitrogen gas. Specially designed for cooling purposes. Inlet connection: W 24.32 x 1/14" (right-hand thread) (DIN 477 Nr. 10) Output connection: 1/4" SAE Maximum inlet pressure: 300 bar Maximum output pressure: 60 bar

Preis 164,70 €
Mehr
Nicht auf Lager