

Keine Marke
Kein Lieferant
Final sealant for small losses.
Compatible with refrigerant gas:
R11, R12, R13, R14, R22, R123, R124, R134a, R141b, R404a, R407c, R410a, R502, R503, R507, R600
Varnostna politika (to uredite z modulom pomiritev stranke)
Politika dostave (to uredite z modulom pomiritev stranke)
Politika vračila (to uredite z modulom pomiritev stranke)
Professional use only. Always use protective glasses and gloves.
PREVENTATIVE CHECK TEST:
1. Make the vacuum of the HVAC system for 5 minutes.
2. Reach the value of „-1bar”. Keep this value for 4 minutes (nessessary condition). If you can’t keep this value, the leak is too big to be repaired.
INSTRUCTIONS:
1. Turn the HVAC system on.
2. Connect the hose to the syringe. Push the piston of the syringe, comletely filling the hose.
3. Connect the syringe to the low pressure port of the cooling system.
4. Push the piston of the syringe, introduce the product in the system, then disconnect.
5. Let the product takes effect with the HVAC system turned on for 20 minutes.
Aktuell keine Kunden-Kommentare
Technical details: Voltage: 230V / 50-60Hz Flow rate: 6 cfm (170 l / min) End vacuum: 15 microns Engine power: 3/4 hp Thread connections: 1/4 "SAE and 3/8" SAE Oil filling: 600 ml Dimensions: 346X135X302mm Optional units for vacuum gauge: Pa, mBar, inHg, micron Weight: 11.5kg + oil + packaging
Technical details: Voltage: 230V / 50-60Hz Flow rate: 8 cfm (227 l / min) End vacuum: 15 microns Engine power: 3/4 hp Thread connections: 1/4 "SAE and 3/8" SAE Oil filling: 600 ml Dimensions: 346X135X302mm Optional units for vacuum gauge: Pa, mBar, inHg, micron Weight: 11.5kg + oil + packaging
Suitcase contains: 1pcs tube flaring gauge 1pcs Vise with inch grabber (1/4", 5/16", 3/8", 1/2", 5/8", 3/4") 1pcs Vise with metric grabber (6, 8, 10, 12, 15, 16, 18mm)
Impact-resistant plastic case R22, R32, R290, R410A, 1234yf, R134a, R404A, R407C, R507 refrigerant packs. Pressure display: psi, bar, KPa, MPa, kg/cm Temperature display: °C, °F Works with standard 9V battery about 50 ours. 1 pin design. Battery status indicator.
Refrigerant filling quantity control. It automatically switches off the charging when weight is reached.Measuring range from 0.002 to 50 kg.Chilling technicians basic toolkit.Solid metal construction with plastic case.
Internal thread: 7/16 "NPT External thread: 1/4 "SAE
Suitcase contains: 1pcs tube flaring gauge 1pcs Vise with inch grabber (1/4", 5/16", 3/8", 1/2", 5/8", 3/4") 1pcs Vise with metric grabber (6, 8, 10, 12, 15, 16, 18mm) 1 pcs tube cutter
220VAC 50 / 60Hz (58 / 55W)Maximum lifting height: 5mSupply capacity: ~ 48l / h (0m), ~ 32l / h (4m)
Model: FCU-2800/4200 Cooling capacity¹: 2800W (9550 BTU/h) Heating capacity²: 4200W (14300 BTU/h) Air flow max: 400 m3/h Air flow min: 180 m3/h Noise: 39 dB Power input: 12W Waterflow volume: 0,49 m3/h Pressure dropping: 18 kPa Water tube connection (inlet and outlet): R 1/2" Maximum working pressure: 16 bar Condensation pipe: ∅ 21mm Dimensions: 1100mm x...
Suitcase contains: 1pcs tube flaring gauge 1pcs VTC-28B tube cutter 1pcs Vise with inch grabber (1/4", 5/16", 3/8", 1/2", 5/8", 3/4") 1pcs Vise with metric grabber (6, 8, 10, 12, 16, 19mm)